September 15, 2026
Understanding where buildup occurs can help put hydrojetting into context. Materials that collect along the interior of a pipe can affect the available space for water to move through the line. A cleaning method that reaches the interior walls can address accumulated material rather than focusing only on creating a temporary path through a blockage.
According to the U.S. Environmental Protection Agency (EPA), grease from homes, restaurants, and industrial sources is responsible for 47% of reported sewer blockages. Grease buildup can therefore be an important consideration when discussing sewer and drain cleaning. Keeping the focus on the buildup itself can help explain why a thorough cleaning process may be considered for affected lines.
Common Grease Buildup Problems
Identify Common Grease Buildup
Grease can accumulate inside sewer and drain lines and contribute to stubborn blockages and reduced flow. This can be especially relevant for restaurants and commercial kitchens, where grease can collect in drains and grease traps. Hydrojetting provides a way to address this buildup by using highly pressurized water to clean the interior walls of pipes.
Grease buildup can become part of the material collected inside a drainage line over time. As this material remains within the pipe, it can combine with other substances such as sludge and debris. Recognizing grease as one of several materials that may be present helps explain why a thorough cleaning process can be useful when a drain or sewer line has persistent buildup.
Address Grease-Related Drain Problems
Grease is not the only material that can contribute to difficult drain and sewer problems. Sludge, mineral buildup, roots, and debris can also collect inside pipes. Hydrojetting can address these materials as part of a deeper pipe-cleaning process, helping restore proper flow in sewer and drain lines.
The type and amount of material inside a line can vary depending on the application. Residential drains, commercial drainage systems, and larger pipelines can all have different cleaning needs. This cleaning method can address several types of buildup during the same service, keeping the focus on the condition of the pipe interior and the movement of material through the line.
Effective Hydrojetting Process
Use High-Pressure Water
Hydrojetting uses highly pressurized water to break apart and flush away stubborn buildup inside drain and sewer lines. The equipment can deliver water at pressures of up to 4,000 PSI. This high-pressure cleaning process can remove grease, sludge, mineral buildup, roots, and debris from pipe interiors while helping restore proper flow.
The pressure of the water provides the force used during the cleaning process. Rather than relying on a material added to the pipe, the service uses water to work against buildup along the interior of the line. This makes the pressure level and the movement of water important parts of how the service addresses accumulated material inside sewer and drain systems.
Direct Water Through Specialized Nozzles
Hydrojetting equipment delivers high-pressure water through specialized nozzles designed to clean the inside of pipes. The pressurized water helps break apart buildup and flush material from the line. This service can be used on sewer and drain lines as well as larger pipeline applications.
Specialized nozzles help direct the water within the pipe so the cleaning process can reach areas where buildup has collected. The water works along the interior of the line as material is broken apart and flushed away. This approach can be used for different pipe-cleaning applications, including sewer and drain lines and larger-diameter pipelines.
Effective Grease Removal
Break Apart Grease Buildup
High-pressure water can break apart and flush away grease buildup from the interior walls of pipes. This service is designed to address stubborn clogs and severe buildup while helping restore proper flow. Besides that, the process can remove sludge, mineral deposits, roots, and debris from sewer and drain lines.
Grease can form part of a larger accumulation inside a sewer or drain line, so the cleaning process may involve more than the visible grease itself. High-pressure water can work against the material collected along the pipe walls and move loosened material out of the line. This makes the service applicable when a pipe requires more thorough cleaning than simply opening a narrow path through a blockage.
Clean Different Pipeline Applications
Hydrojetting can be used across residential, commercial, industrial, agricultural, and municipal applications. The service can address sewer and drain lines as well as large-diameter pipelines. This range of applications allows the cleaning method to be used for different types of piping systems, from residential drainage to larger commercial, industrial, agricultural, and municipal lines.
Each setting can involve different types of drainage and piping systems, but the basic cleaning method remains centered on highly pressurized water. Residential lines may require attention to drain buildup, while commercial, industrial, agricultural, and municipal systems can involve larger lines and accumulated material. The service can be applied according to the type of pipeline being cleaned.
Practical Hydrojetting Applications
Clean Commercial Kitchen Drains
Commercial kitchen drains are one application for hydrojetting. Grease and other materials can accumulate inside kitchen drainage systems, making thorough cleaning important for maintaining proper flow. High-pressure water cleaning uses pressurized water to break apart and flush away buildup from the interior of the line.
Kitchen drainage systems can encounter grease as part of their regular use, making grease buildup a relevant consideration for commercial properties. When material collects inside the drain line, cleaning the pipe interior can help address that accumulation. This cleaning approach can be used for commercial kitchen drains where grease and other buildup are present.
Clean Grease Traps
Grease traps are another application for the service. High-pressure water cleaning can be used to address grease buildup in commercial and other applicable drainage systems. The cleaning process can help remove accumulated grease and other materials from the system.
Grease traps are part of drainage systems where grease needs to be addressed. Over time, accumulated material can become part of the cleaning requirements of these systems. A pressurized water approach can address buildup in grease traps as well as related drainage lines.
Clean Large-Diameter Pipelines
Hydrojetting is not limited to smaller residential drain applications. The service can also be used to maintain proper flow capacity in large-diameter pipelines. Industrial, agricultural, and municipal customers can use the service to address buildup and blockages in larger piping systems.
Larger pipelines can require specialized cleaning equipment capable of addressing buildup across a greater pipe diameter. High-pressure water cleaning can be used in these applications to move accumulated grease, sludge, mineral buildup, roots, and debris from the pipeline. Its use across industrial, agricultural, and municipal settings also makes it applicable beyond standard residential drain cleaning.
Prepare Pipes For Other Services
Hydrojetting can also be used as part of other pipe services. Cleaning the interior of a pipe can help prepare it for a camera inspection or pipe lining. The service can remove grease, sludge, mineral buildup, roots, and debris before these services are performed.
Preparing a pipe before another service begins can provide a cleaner interior for the work that follows. When buildup or debris is present inside the line, cleaning can address those materials first. This process can therefore serve as one step within a broader pipe service when a camera inspection or pipe lining is planned for the cleaned section.
Choose Hydrojetting For Sewer And Drain Cleaning
Hydrojetting offers a high-pressure method for cleaning sewer and drain lines affected by grease, sludge, mineral buildup, roots, and debris. From commercial kitchen drains and grease traps to large-diameter pipelines, the service can support residential, commercial, industrial, agricultural, and municipal applications. To learn more about hydrojetting and available sewer and drain cleaning services, contact Roto-Rooter Sewer & Drain Service.
